8221系列高压力传感器

坚固,准确,可靠,长期稳定的不锈钢,用于液体和气体介质,用于静态和动态测量

  • Features

    • 测量范围从0 ... 1000 bar到0 ... 5000 bar
    • 精度误差≤0.2%F.S.
    • 中等温度范围--30°C ... 120°C
    • 动态测量的理想选择
    • 防护等级IP66
    • 带有集成仪表放大器的数字校准
  • Product data

    型号L 8221
    量程L 0 … 1 kbar
    0 … 2 kbar
    0 … 3.5 kbar
    0 ... 4 kbar
    0 … 5 kbar
    测量类型L 测量表压
    信号输出L 1 mV/V

    工作温度L -30 ... +120 °C
    过载损坏L 200%额定量程
    特点L
    • 测量范围从0 ... 1000 bar到0 ... 5000 bar
    • 精度≤0.2%F.S.
    • 中等温度范围--30°C ... 120°C
    • 动态测量的理想选择
    • 防护等级IP66
    • 带有集成仪表放大器的数字校准
  • Description

    The reliability and safety of a sensor is extremely important, particularly in high-pressure applications such as water-jet cutting equipment and hydraulic circuits. The dynamic loading encountered in these applications requires the use of sensors that are specially adapted for high pressure ranges. It is exactly these tough requirements that are satisfied by the model number 8221 sensor. With dynamic pressures, for example, an unlimited number of measurements can be taken if the pressure lies within the range from 0 ... 70% full scale.

    The strong construction allows liquid or gaseous media to be measured in the laboratory, production department or in mobile hydraulic applications.

    Range of applications:

    • Laboratory
    • Production
    • Aeronautical engineering
    • Cutting equipment
    • Hydraulics
    • Test benches

    The monolithic sensor membrane guarantees a high level of precision, reliability and safety, since the medium does not come into any contact with welded seams. Great emphasis has been placed on safety in the mechanical design. It is fitted with relief holes, which permit the measurement of static and dynamic pressures, even under unfavorable environmental conditions.

    In order to facilitate the exchange of the sensors without having to recalibrate the following electronics, the sensitivity of the high-pressure sensor is standardized at 1.0 mV/V. The sensor is fitted with an integrated shunt resistor to enable easy calibration or checking of the subsequent electronics.

    In combination with the option of an integrated amplifier (0 ... 10 V, 0 ... 5 V and 4 ... 20 mA) the new, innovative function for digital calibration can be used: All that is necessary is to touch the marked surface of the sensor with the enclosed magnetic pen.

  • Downloads

    Data sheet
    pdf 8221技术参数

Related products

Product comparison

    © 2020 波司特精密仪器(上海)有限公司 沪ICP备12015704号沪公网安备31010602000957号