8656系列扭矩传感器

• Features

  •     量程范围 从0 ...±1N·m 到 0 ... ±100 N·m
  •     紧凑的小型化尺寸
  •     模拟量量电压输出±10V 或 选配USB输出

• Product data

  型号T	8656
  工作方式T	旋转
  量程选择T	0 … ± 1 Nm 0 … ± 2 Nm 0 … ± 5 Nm 0 … ± 10 Nm 0 … ± 20 Nm 0 … ± 50 Nm 0 … ± 100 Nm
  信号输出T	0 ... ±10 V 或 USB（选配）
  第二量程比例T	No
  机械连接T	光轴 或 带键槽
  保护等级T	IP40
  使用温度T	0 ... +60 °C
  集成速度测量T	可选配
  集成角度测量T	可选配
  编码器增量T	400 增量
  最大转速T	≤ 10000 rpm
  信号传输方式T	滑环传动系统
  具体特征T	量程范围 从0 ...±1N·m 到 0 ... ±100 N·m     紧凑的小型化尺寸     模拟量量电压输出±10V 或 选配USB输出

• Description

  The very short torque sensor model 8656 is contactless constructed. The torque is recorded by the torsion of the shaft using the strain gauge principle. Thanks to the inductive and optical transmission of the signals, the sensor is maintenance-free, the signals are digitized directly on the shaft and made available by the evaluation electronics as a voltage signal or via USB. Thanks to the high-quality, up to 10,000 rpm is possible. The direction of rotation can be seen from the potential of the output voltage, clockwise rotation corresponds to positive output voltage, counterclockwise rotation the voltage level is negative.

  The shaft is equipped with keyways in every measuring range, matching keys are included. If a key connection is not required, the key can be omitted. The torque is matched with suitable couplings, we recommend model 8690, safely transmitted.

  To record the speed and angle of rotation, the sensor can optionally be equipped with an incremental disc with 400 increments. This speed / angle signal is available as a TTL output signal.

  The free DigiVision software is available in connection with USB, alternatively drivers for LabVIEW and DASYLab are ready for download.

  Connection cables in various lengths, metal bellows couplings and mounting brackets are available for integration in customer-specific systems.

• Downloads

  Data sheet

  8656技术参数

  中