自动范围选择,测试电压可选1 V ... 1000 V,RS232(IEEE 488)接口

  • Features

    • 电阻测量范围从1kΩ... 100TΩ
    • 电流测量范围0.1pA ... 1mA
    • 自动切换量程
    • 测试电压可选1V...1000V
    • 测量结果可存储在外部USB闪存驱动器上
    • RS232接口(USB和以太网选件)
  • Description

    RESISTOMAT® model 2408 megohmmeter has been especially developed to measure extremely high resistance values with a high degree of accuracy. This instrument has a specifi cation that makes it suitable for all common applications. The measurement voltages equal those given in the DIN test regulations (e.g. DIN 51953, DIN 53482, DIN 54345, DIN 57281 and DIN 57411) for measuring the electrical resistance value across fi lms, fl oor coverings, test equipment, cables, moldable materials, rubber, plastics, insulating oils and the like. 

    Fast serial measurements can be performed using the integral limit indicator. If the reading lies below an adjustable limit, the pass/fail limit indicator trips and enables a potential-free output. All functions can be PC-controlled via the built-in RS232 interface provided as standard. 

    The guard circuit in shield technology can be used to measure individual resistances in a delta connection. This means, for instance, it is possible to measure the insulation resistance between wire and  shield on a 2-core cable with common shield without the result being distorted by the two guard resistances lying in parallel (see diagram overleaf). The meter can also be used to measure the leakage currents fl owing through the test specimen; in “current measurement “ mode it measures currents from 0.1 pA to 1mA.

    RESISTOMAT® model 2408 digital megohmmeter is a microprocessor-controlled instrument for measuring high resistances and small currents. Measurements can be made in the range 1 kΩ to 100 TΩ, with the user able to freely select a test voltage between 1 V and 1000 V. All instrument functions can be set manually and via RS232 interface.

    On-screen information guides the user effi ciently through the meter’s range of application-oriented confi guration options, clearly displayed on the backlit graphical display with adjustable contrast level. With its rugged case, this instrument is designed for both laboratory use and harsh industrial environments.

    For automated system applications the megohmmeter RESISTOMAT® model 2408 includes an I/O interface connection with remote start and pass/fail outputs. Test setup configurations and measurement results can be stored in CSV format on an external USB flash drive for easy use with Microsoft Excel.

  • Downloads

    Data sheet
    pdf 2408资料参数
    Operation manual
    pdf 2408使用手册

Related products

Product comparison

    © 2020 波司特精密仪器(上海)有限公司 沪ICP备12015704号沪公网安备31010602000957号